Emma Bailey Emma Bailey's Profile Page

Emma Bailey Emma Bailey

0 Course Enrolled • 0 Course Completed

Biography

MB-240 Latest Study Questions - Exam MB-240 Overviews

In this way, the Microsoft MB-240 certified professionals can not only validate their skills and knowledge level but also put their careers on the right track. By doing this you can achieve your career objectives. To avail of all these benefits you need to pass the MB-240 Exam which is a difficult exam that demands firm commitment and complete MB-240 exam questions preparation.

Perhaps you have seen too many MB-240 exam questions on the market and you are tired now. But ourMB-240 preparation quiz can really give you a different feeling. We have conducted research specifically on the current youth market, so we are very clear about what young people like today. OurMB-240 learning guide combine professional knowledge and trends to make you fall in love with learning!

>> MB-240 Latest Study Questions <<

Exam MB-240 Overviews & MB-240 Real Questions

It is a common sense that in terms of a kind of Microsoft Dynamics 365 Field Service Functional Consultant test torrent, the pass rate would be the best advertisement, since only the pass rate can be the most powerful evidence to show whether the MB-240 Guide Torrent is effective and useful or not. We are so proud to tell you that according to the statistics from the feedback of all of our customers, the pass rate among our customers who prepared for the exam under the guidance of our Microsoft Dynamics 365 Field Service Functional Consultant test torrent has reached as high as 98%to 100%, which definitely marks the highest pass rate in the field. Therefore, you can carry out the targeted training to improve yourself in order to make the best performance in the real exam, most importantly, you can repeat to do the situation test as you like.

Microsoft Dynamics 365 Field Service Functional Consultant Sample Questions (Q78-Q83):

NEW QUESTION # 78
You are a Dynamics 365 for Field Service Administrator. You configure Route Scheduling Optimization (RSO) and publish the schedule.
One of your schedulers indicates two of their resources are not getting work orders assigned.
You need to determine reasons why the two resources are not assigned work orders through RSO.
Which three options should you choose? Each correct answer presents a complete solution.

A. Start Location and End Location fields are not the same.
B. Scheduling Method is not set to Optimize.
C. Work Hours is not properly configured for days being optimized.
D. The Work Location field is not set to Onsite.
E. Optimize Schedule field is not set to Yes.

Answer: A,B,E

Explanation:
Section: Schedule and dispatch work orders
Explanation:
https://docs.microsoft.com/en-us/dynamics365/customer-engagement/field-service/rso-configuration

NEW QUESTION # 79
Drag and Drop Question
To improve communications with customers, your company has decided to implement Twilio, a third-party communication platform that has call and messaging capabilities.
The Twilio solution includes a number of core components to deliver the capability, all of which need to be set up.
Which five steps should you take in sequence to prepare data for optimization? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION # 80
You are a Dynamics 365 for Field Service Dispatcher reviewing automatically generated bookings for optimization of the schedule.
You notice that, for certain customers, Work Orders are being generated without service tasks, products, or services, when they should have them documented from the Agreement.
Which two of the following should you troubleshoot? Each correct answer presents part of the solution.

A. Agreement Booking Setup contains appropriate Service Tasks, Products, and Services
B. Incident Type contains appropriate Service Tasks, Products, and Services.
C. Incident Type field "Copy Incident Items to Agreement" is marked "Yes".
D. Agreement Booking Setup field "Auto Generate Work Order" is marked "Yes".

Answer: A,C

Explanation:
Section: Manage work orders

NEW QUESTION # 81
You are a Microsoft Dynamics 365 Field Service dispatcher.
You need to implement a capability within the schedule board to allow you to find resources for a work order.
The work order can be done by any resource with the right piece of equipment, who is available at 9:00 A.M.
during a selected week.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION # 82
A new service technician was recently hired on at Litware, Inc. and is assigned to the HVAC team. The service technician is still learning about the job and the units the company sells and services.
The service technician has been assigned to a repair work order for a unit. Upon arrival and inspection, the service technician turns off the one circuit breaker to the unit, but is not sure what should be done next. The service technician makes a phone call to the internal help team, but they aren't sure how to provide guidance as they cannot see what exactly the service technician is looking at and the service technician cannot describe it.
What should the company implement to handle this sort of issue?

A. Microsoft Dynamics 365 Remote Assist
B. Microsoft Teams
C. Microsoft Dynamics 365 Guides
D. Resource Scheduling Optimization

Answer: A

Explanation:
Topic 2, Contoso Case studyGeneral Overview
Contoso is a large international manufacturing company that has offices around the world with service and scheduling departments in each office. In addition. Contoso has sates reps throughout the world.
Contoso has main offices in North America. Europe and Asia, with global headquarters based in Redmond, Washington, USA. Each of the regional offices has their own sales and service teams. The regional HQ locations also include sales and services leaders and executive management. Global HQ houses company executives for various departments, including sales and service.
Office hours are from 8:00 am to 6:00 pm. every day of the week except holidays, which have no work hours.
This applies to all offices, using their local time zone. Third-party contractors handle work outside of normal work hours at a higher rate Field Service staff Contoso's service technicians around the world will be a combination of internal employees and third-party contractors.
* Pay type is Straight for regular work hours, and Overtime for work on holidays and after hours.
* All technicians have the capacity of handling just one job at a time, while supervisors can handle 2 jobs at a time.
Contoso's internal field service employees:
* Begin and end their workday at their home of record.
* Have a default office location / regional office.
* Are assigned to multiple territories.
All third-party contractors:
* Begin and end their workdays at their office location.
* Have a default office location / regional office.
* Are assigned to only one territory.
Dispatchers:
* Work at the Main office for their region
* Assigned to all territories in the region.
* Have privileges to customize their Schedule Boards.
All field service technicians will utilize the Field Service mobile app.
* Contoso employees will have full field service licenses, while third-party contractors will not.
* Field Service technicians will not have access to Leads. Opportunities or other sales-specific data.
* Dispatchers can see all data for their region, though they will mostly be scheduling for only one territory.
Contoso has several classes to distinguish the capability and training level of its field technicians. All work order bookings need to respect these classes and book resources accordingly.
Org structure setup
Contoso currently uses Dynamics 365 Customer Engagement for leads, opportunities, quotes and orders.
There are currently 200 sales users in North America. 500 in Europe and 400 in the Asia-Pacific region.
The Contoso physical environment is structured in the following manner, with the roles noted.

Field Service structure
Contosos field service technicians respond to all installation work orders with two human resources:
* One licensed technician (Level 3). and...
* One apprentice technician. Apprentices can be either Level 1 (new trainee) or Level 2 (halfway through training).
In many cases installation work also requires the use of specialty tools, depending on what is being installed The current system does not have any way to track the level of skill for each resource, nor the uses for the specialty tools. This is handled as "tribal knowledge." Preventative maintenance work orders can be handled by one resource if they are a Level 2. If the resource is a Level 1. they must be accompanied by a Level 3 resource, and vice versa.
All field service technicians are required to complete OSHA training annually. In their first year of apprenticeship they must complete the full 40-hour course. In the next 2 years they must complete the 8-hour refresher course. This cycle repeats every 3 years for the duration of their employment.
In the current system, when a technician has finished with a work order, they turn in the paper copy with their notes to the dispatcher. The dispatcher then gives that information to a back-office employee, who will check the work order to ensure accuracy before creating an invoice. Contoso wishes to automate this exact process in the new system.
Customer base
About half of Contoso's customer base includes Not For Profit service organizations. The implications for billing are complex, so it's important that Tax Exempt Status be noted for all Accounts and flow through to all Work Orders. NFP Customers who are associated with government entities will pay for travel time; other customers will not. This information should flow from the Billing Account to all associated Service Accounts.
Most Contoso customers sign agreements for Preventative Maintenance. Contoso uses templates and incidents to ensure services standards are the same across all regions. Preventative Maintenance agreements include monthly inspection and quarterly cleaning and inspection, with billing occurring quarterly.
Remaining consistent
Contoso plans to keep the current data structure and extend it to the new Field Service functionality.
Field Service users will fall under the same organizational structure currently implemented for the sales staff.
* Field service technicians will only be able to see their assigned work orders and bookings.
* Dispatchers will be able to see all work orders and bookings for the region- Planned changes Contoso plans to implement Dynamics 365 Field Service with mobile access. They will be using incidents, work orders, bookings and invoicing. The following requirements were gathered during analysis:
1. Work Orders and Scheduling.
o Automated and suggestion-based scheduling.
o Scheduling based on required technician skills and number of technicians needed.
o Schedule resources based on location, minimizing travel time when possible.
o Technicians must be onsite within 3 hours of an emergency Work Order being assigned to them.
o The travel time should automatically update upon changing a booking.
2. Agreements
o Setup and create work orders, bookings and invoices for preventative maintenance with work orders automatically created 14 days before PM is due. o EscaJation of Work Orders based upon agreed customer commitment. o Ability to designate clients as Preferred, with special pricing.
3. Products and Services
o Warehousing and inventory management processes will be implemented, including tracking products moved onto trucks for installation at customer sites.
o Implement a parts return process that includes having a technician uninstall the part to be returned.
o Multiple price lists will be used, divided into Gold, Silver and Bronze levels, based on the spending level of each customer.
o Internal teams need the capability to associate a 3D image to a Customer Asset record.
o Products added to a work order should be set to Allocated.
4. Resources
o Implement Company Holidays for North American regions, o Implement Paid Time Off for all regions.
o Specialty equipment will be scheduled on work orders as needed.
o Training and skill levels will be noted as appropriate for resources.
5. System
o Geocoding will be activated throughout the system.
o Territories will be used for Accounts, Resources and Work Orders.
Technical requirements
Contoso identified the following technical requirements:
1. Invoking
o Auto creation of invoices upon work completion.
o The system must track the price of resources based on holidays and after-hours scenarios at a rate of one and a half times the no*mal billing rate.
o Travel time is billable for all field service technicians, pay type Travel, which should be noted on all Service Accounts.
2. Resources
o Contractor technicians require access to work order and customer details once assigned to a booking.
o Dispatchers need a schedule board for their region(s).
3. Products and Services
o All parts that are removed from a customer's equipment must be returned to the Main warehouse.
o Products to be marked as Assets will be configured accordingly.
o All products that will become Assets require instalation by a technician.
o All products are received into the Main warehouse.
4. Work Orders
o The ability to have templates for work orders; The templates will provide guidance for technicians along with recommended products and default services.
o Once a work order is posted it should no longer show on views.
o Contoso will use the "out of the box" work order statuses to begin, though they may be changed in later phases of the project.
5. Scheduling
o Once a work order is scheduled, do not change the time.
o Work Orders scheduled to technician(s) who do not have the desired skill set and level should show a warning.
6. Security and access
o Safeguards must be in place for the data on the Field Service Mobile App if a technician loses his mobile phone or tablet device, o The Field Service Administrator needs the ability to update the defaults for the schedule assistant.
7. Accounts
o Any Service Accounts that do not have a Billing Account noted should show a warning, o Any Billing Accounts that do not have a Price List noted should show a warning.

NEW QUESTION # 83
......

May be you will meet some difficult or problems when you prepare for your MB-240 exam, you even want to give it up. That is why I suggest that you must try our study materials. Because MB-240 guide torrent can help you to solve all the problems encountered in the learning process, MB-240 study tool will provide you with very flexible learning time so that you can easily pass the exam. Even if you fail to pass the exam, as long as you are willing to continue to use our MB-240 Study Tool, we will still provide you with the benefits of free updates within a year.

Exam MB-240 Overviews: https://www.examdumpsvce.com/MB-240-valid-exam-dumps.html

In the content of MB-240 exam VCE, we give you more details about test and information of website, We assure that all of the contents in our Exam MB-240 Overviews - Microsoft Dynamics 365 Field Service Functional Consultant exam study material are the quintessence for the exam, and you will find nothing redundant in them, Microsoft MB-240 Latest Study Questions Therefore, you can finish practicing all of the essence of IT exam only after 20 to 30 hours, Microsoft MB-240 Latest Study Questions Well, you are in the right place.

Covers site analysis, navigation, layout, color, MB-240 Latest Study Questions graphics, typography and forms, In the original book, I felt I had done a goodenough job of teaching Python to readers, MB-240 but didn't have the room to get into any details about what you could build with it.

Pass Guaranteed 2025 MB-240: Microsoft Dynamics 365 Field Service Functional Consultant Latest Latest Study Questions

In the content of MB-240 exam VCE, we give you more details about test and information of website, We assure that all of the contents in our Microsoft Dynamics 365 Field Service Functional Consultant exam study material Sample MB-240 Questions Answers are the quintessence for the exam, and you will find nothing redundant in them.

Therefore, you can finish practicing all of the essence of IT exam only after 20 MB-240 Real Questions to 30 hours, Well, you are in the right place, DumpKiller is a good website that provides the candidates with the excellent IT certification exam materials.